Climbing Wall T-Nut’s need to conform as per the specification/procedure below:-

BS EN 12572-2:2017 / 4.7 / Annex E / E.4 Procedure
Carry out the test as follows:
a) load the sample up to (7,2 ± 0,05) kN at a rate of (20 ± 2) mm/min;
b) hold the load for 30 s;
c) relieve down to (1,2 ± 0,05) kN, and measure the deformation;
d) hold the load of (1,2 ± 0,05) kN for 30 s;
e) load the sample up to (12 ± 0,05) kN at a rate of (20 ± 2) mm/min;
Carry out the test under the following conditions: (23 ±2 ) °C and (50 ±10) % relative humidity.

Duda Technology has been manufacturing climbing wall T-Nuts for 10 yesrs. All the T-Nuts offered by us could fully satisfy BS EN 12572-2:2017 standard. If you are looking for climbing wall T-Nuts solution for your project, we would be your right choice.